if you are interested in it , Get free samples :sales@edabearings.com

 
d 85 mm Bore diameter
D 150 mm Outside diameter
T 30.5 mm Total width
B 28 mm Width of inner ring
C 24 mm Width of outer ring
Cup r (min.) 2 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 2.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 226000 N Basic dynamic load rating
C0r 233000 N Basic static load rating
Speeds 
Grease 2400 min-1 Grease lubrication
Oil (Oil-bath) 3200 min-1 Oil-bath lubrication
Dimensions
a 30.3 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 100 mm Diameter of shaft abutment
Db (min.) 141 mm Diameter of housing abutment
Da (min.) 133 mm Diameter of housing abutment
Da (max.) 140 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 6.5 mm Minimum width of space required in housing on small side face
db (max.) 97 mm Diameter of shaft abutment
ra (max.) 2 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.42 Constant
Y0 0.79 Axial load Factors
Y1 1.4 Axial load Factors
Mass
(approx.) 2.12 kg

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
 HR30217J  bearing

---

PREVIOUS:ZWZ HR33216J        NEXT:C&U HR32217J bearing