if you are interested in it , Get free samples :sales@edabearings.com

T 27 mm Total width

B 27 mm Width of inner ring
C 21 mm Width of outer ring
 
d 65 mm Bore diameter
D 100 mm Outside diameter

Cup r (min.) 1.5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 1.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 120000 N Basic dynamic load rating
C0r 156000 N Basic static load rating
Speeds 
Grease 3400 min-1 Grease lubrication
Oil (Oil-bath) 4500 min-1 Oil-bath lubrication
Dimensions
a 21.1 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 76 mm Diameter of shaft abutment
Db (min.) 96 mm Diameter of housing abutment
Da (min.) 90 mm Diameter of housing abutment
Da (max.) 91 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 6 mm Minimum width of space required in housing on small side face
db (max.) 71 mm Diameter of shaft abutment
ra (max.) 1.5 mm Radius of shaft or housing fillet of inner ring
ra (max.) 1.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.35 Constant
Y0 0.95 Axial load Factors
Y1 1.7 Axial load Factors
Mass
(approx.) 0.76 kg

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK   HR33013J
 C&U  HR33013J bearing

---

PREVIOUS:HRB HR33011J        NEXT:TMB HR30213J