if you are interested in it , Get free samples :sales@edabearings.com

Dimension series
ISO 3DE ISO355 dimension series approx.
Boundary Dimensions
d 70 mm Bore diameter
D 120 mm Outside diameter
T 37 mm Total width
B 37 mm Width of inner ring
C 29 mm Width of outer ring
Cup r (min.) 1.5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 2 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 218000 N Basic dynamic load rating
C0r 262000 N Basic static load rating
Speeds 
Grease 3000 min-1 Grease lubrication
Oil (Oil-bath) 4000 min-1 Oil-bath lubrication
Dimensions
a 27.9 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 82 mm Diameter of shaft abutment
Db (min.) 115 mm Diameter of housing abutment
Da (min.) 104 mm Diameter of housing abutment
Da (max.) 111 mm Diameter of housing abutment
Sa 6 mm Minimum width of space required in housing on large side face
Sb 8 mm Minimum width of space required in housing on small side face
db (max.) 79 mm Diameter of shaft abutment
ra (max.) 2 mm Radius of shaft or housing fillet of inner ring
ra (max.) 1.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.38 Constant
Y0 0.87 Axial load Factors
Y1 1.6 Axial load Factors
Mass
(approx.) 1.71 kg
We also offer the following brands
ZWZ LYC C&U TWB HR33114J  TMB HRB LS NSK  bearing
HR33114J 

---

PREVIOUS:TMB HR30213J        NEXT:C&U HR33214J