if you are interested in it , Get free samples :sales@edabearings.com

Dimension series
ISO 2DC ISO355 dimension series approx.
Boundary Dimensions
d 160 mm Bore diameter
D 220 mm Outside diameter
T 38 mm Total width
B 38 mm Width of inner ring
C 30 mm Width of outer ring
Cup r (min.) 2 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 2.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 365000 N Basic dynamic load rating
C0r 570000 N Basic static load rating
Speeds 
Grease 1400 min-1 Grease lubrication
Oil (Oil-bath) 1900 min-1 Oil-bath lubrication
Dimensions
a 38.7 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 175 mm Diameter of shaft abutment
Db (min.) 212 mm Diameter of housing abutment
Da (min.) 206 mm Diameter of housing abutment
Da (max.) 208 mm Diameter of housing abutment
Sa 7 mm Minimum width of space required in housing on large side face
Sb 8 mm Minimum width of space required in housing on small side face
db (max.) 173 mm Diameter of shaft abutment
ra (max.) 2 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.35 Constant
Y0 0.95 Axial load Factors
Y1 1.7 Axial load Factors
Mass
(approx.) 4.32 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR32932J bearings

---

PREVIOUS: LYC 32030        NEXT:HRB 32032